Los productos de la familia ACUSTICA Mediciones
La marca Audiomatica
« anterior 1 2 siguiente »
ACUSTICA Mediciones
Clio FW
The FW-02 USB Audio Interface sets new hardware precision standards for the CLIO System. The FW-02 unit has been designed to be a complete two channels professional A/D D/A audio front-end for your PC; it is connected to the computer by an IEEE-1394 link giving you maximum performances; it can be powered by the same link giving you maximum portability. The FW-02 performances (24 bit @ 192 kHz) represent(...)
ACUSTICA Mediciones
Clio System Calibration
Su CLIO hardware se le puede acreditar con un certificado de calibración “SIT Certificate of Calibration”. Este documento, expedido por un laboratorio acreditado por el “Italian Calibration Service”, ofrece un informe sobre los datos de medición de las primeras cantidades generadas y analizadas por el instrumento (voltajes AC) en línea con estándares nacionales e internacionales. Este documento suele(...)
ACUSTICA Mediciones
Microfonos MIC-01, 02 et 03
MIC-01, MIC-02 et MIC-03 are low cost precision condenser electret microphones perfectly suited for laboratory and on-field acoustical measurements. They have identical performances but differ for their physical size; MIC-01 is preferable for fixed laboratory installations while MIC-02 and even more MIC-03 are highly manageables due to their short length. Their frequency response is individually tested(...)
ACUSTICA Mediciones
Microphone Calibration
Los micrófonos MIC-01 y MIC-02 pueden obtenerse con un certificado de calibración de frecuencia. Este documento, conjuntamente con los datos numéricos en floppy disk, es creado por Audiomatica y especifica el comportamiento en frecuencia del micrófono individual bajo prueba. Los datos del fichero pueden utilizarse con CLIO y CLIOwin software.
ACUSTICA Mediciones
QCBox Model 5
The QCBOX Model 5 is a non-conventional unit designed to fulfil actual and future needs of an electro-acoustical analyzer like the CLIO system. It is USB linked to a PC and can be configured, with dedicated software controls, to assist frequency response and impedance measurements or to perform DC measurements. Using it for frequency response measurements acts as 50W power amplifier to drive the speaker(...)
ACUSTICA Mediciones
Pre Micro PRE-01
The optional, battery-operated, PRE-01 microphone preamplifier satisfies the needs of laboratory measurements, performs A-weight filtering and drives long cables to the PC. The microphone preamplifier PRE-01 has been designed to match Audiomatica’s microphones MIC-01 and MIC-02. It is particularly useful when the microphone has to be operated far from the analyzer or when weighted measurements are(...)
ACUSTICA Mediciones
Pre micro PRE-33A
The supply, filter & gain unit PRE-33A has been designed to match Aco Pacific’s microphone capsule 7012 (and relative preamplifier 4012) and is needed to operate it. The PRE-33A powers the microphone connected to its input with a 200V phantom supply and adds a selectable weighting filter (A or B or C); also available there is a configurable attenuation/gain stage (-20dB/0dB/+20dB). The unit is operated(...)
ACUSTICA Mediciones
Foot Pedal switch
Este accesorio se aplica en líneas de producción donde el sistema CLIO se utiliza para la realización de mediciones de Control de Calidad. Pulsando el interruptor, es posible arrancar y continuar con la ejecución de las mediciones. Para mayor información, véase el QC User’s Manual.
ACUSTICA Mediciones
Accelerometer ACH-01
El acelerómetro ACH-01, de la compañía Measurement Specialties, es un transductor de propósito general de bajo precio, que cumplirá sus necesidades relativas a la monitorización y medición de vibraciones. Este componente se ofrece ya unido a su cable, de modo que permite directamente la conexión sencilla a la entrada del CLIO (quien a su vez le suministra de corriente eléctrica).
« anterior 1 2 siguiente »