Noticias

26.01.2011

DOCET U-DAC : USB/SPDIF interface DAC

DOCET U-DAC : USB/SPDIF interface DAC

Connect your PC/Mac to hi-quality music machine !

U-DAC is the link device between the PC/Mac to your hi-fi system by a simple USB connector, otherwise is suitable also the SP/DIF output RCA connector to convert the USB to SP/DIF at any frequency.

Texto completo

23.01.2011

47 Laboratory 4733 Headphone/Pre/Amplifier/USB DAC

47 Laboratory 4733 Headphone/Pre/Amplifier/USB DAC The second of the Midnight Blue series is probably one of the most flexible headphone/pre-amplifier in the market today. It is a headphone/pre amplifier with USB/DAC on board and has 2W output, meaning it can drive small computer speakers without additional power amp. It is an active pre-amplifier with USB, coaxial and 2 x RCA inputs. The circuit board is Junji's proprietary simple design. Sound? You do not need to ask if you are already familiar with any of 47 Lab products. Inputs : Coaxial, USB, Line 1, Line2 Out puts : 1x Speaker, 1x Headphone, RCA Jack Output power 2W/ Ch. at 8 ohm Dimension 123W x 96H x 208D Weight : 1.7kg

Texto completo

11.12.2010

3T van den Hul : a new serie of cables

3T van den Hul : a new serie of cables

3T – a revolution in the audio(cable) industry

All galvanic conductors that are being used in the audio industry today, are made from soft metals. The advantage is that there are a lot of free electrons available. This is beneficial for the conductivity of the cable. A large amount of free electrons automatically means a low conductor resistance. Traditionally the so called “experts” love to see this.

The disadvantage of this choice is that the conductors can be reshaped rather easily; they don’t posses a stable internal structure. These metals are also very sensible for thermical, chemical and mechanical ageing. For this reason, the sound will change dramatically over a relative short period of time. Result is you’ll have to buy a new pair, the history repeats itself, etc. etc.. Not really a plan to get ahead of the game.

To have a longer lasting reply on the above problem, we were the first company that started producing a completely metal-free conductor series applying our Linear Structured Carbon® (The FIRST®, SECOND® and THIRD®).

Another ten years of research, starting with our Fusion Technology, has finally resulted in a new revolution in the conductor world: 3T (True Transmission Technology).

The idea behind the 3T concept is that you use as much electrons as possible to bind the metal atoms together. The disadvantage of a slightly higher impedance is more than compensated with the rigid structure of the conducting material. The only way to do this was to, again, disregard the general views and to go in a completely new direction.

The base (and eventually the outcome) of this research are:

 1. No mechanical or chemical ageing anymore.

2.  No metal layers in the conductor to prevent any kind of chemical activity between them.

3.  Big mechanical flexibility combined with an extremely small bending radius.

4.  Big mechanical pull-strength,. At least 150 Kg/mm2.

5.  An amorphous structure to have no crystalline boundaries in the conductive material..

6.  Completely stable at higher temperatures ( up to 250 degrees Celsius).

7.  A really stable structure turned out to be only possible in a mix of various metals in an exact ratio. In the end it turned out five metals and one non-metal were needed.  

8.  Extremely long lifespan without any change in sound characteristics.

9.  A very short burn-in time. After approximately two hours you can expect good results. After only 48 hours the cables have reach their optimum.

10.  A very high resolution during replay

11.  Because of this high resolution great audible acoustics.

12.  No dynamic limitation what so ever.  

13.  Especially the spectre between 40 Hz – 200 Hz and 2 KHz. – 15 KHz. Needs to remain perceptable. A lot of conductors experience serious problems in these areas.

14.  Last but not least: applicable in industrial situations.

This whole list of properties is packed together in our unique 3T conductors.

All knowledge on how to build a cable is applied to make a series of four balanced interconnects (The VALLEY, The ROCK, The HILL and The MOUNTAIN. Early 2011 we expect to bring another series of four coaxial interconnects.

The 3T speaker cables will have to come later as there are still some matters to be solved, amongst others the higher impedance is a problem here.

Combined with our new jacket printing technique, distinguishing this product from any copy-cat versions makes that we have again done the unthinkable and made what is probably one of the very best interconnects available in the world today.

Texto completo

25.11.2010

PSU-7 : new power supply for CDP-7

PSU-7 : new power supply for CDP-7

PSU-7 is the new super power supply for CDP-7.

4 power transformers and 1 galvanic 500 VA isolator

Residual AC noise level : better than 50 uV

DC block filter : two levels selectable LOW (>3V) and HIGH (<9V)

5 led display voltage monitor for analog quality check

5 toggle commands : power on main/analog/digital/heater/dc filter

Outputs : multiway connector for CDP-7 and IEC output for slave unit mains supply

Power supply available : 100/110/230/240 V AC ; 50/60 Hz ; 650 VA

Dimensions (LxPxH) : 440 x 300 x 100 mm

Weight : 17 kg

Accessories supply : special power cable mains/ manual/lateral panels wood or black plexiglas

Optional accessories : spikes feet for round foot set of three/Floating special feet

Texto completo

27.10.2010

New player AUDIA : CD ONE M

New player AUDIA : CD ONE M

The Audia Player CD ONE M is the same of the CD ONE mk2, but it has one input RCA SP/DIF and one USB.

The USB input work until 192KHz 24bit. The USB input has insulated by ADuM (analog devices) to prevent any noise from the PC.

When the USB is used together with a player application such as FooBar or WinAmp (available for free on Internet),you can transfer stream music files to internal converter at 192kHz/24bits maximum frequency/resolution,avoiding undesired PC or MAC audio mixer data processing during the data transfer from hard disk to interface.

Presently, Windows XP, Vista, Windows 7 drivers are available, as well as Mac drivers for 10.4, 10.5 and 10.6.

If a 192kHz stream music is transferred from the PC to the CD ONE-M, the 192kHz is detected and the 192kHz stream data is applieddirectly to the converted, bypassing the upsampling circuit, for the best sound performance.

About the price, 5490,00Euro public

Texto completo

« anterior 1 2 3 siguiente »